Table of Contents
Advertisement
32
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Interrupt
Controller) mode. APIC provides symmetric multi-processing (SMP) for systems, allowing
support for up to 60 processors.
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64 MB of memory and you are
running the OS/2 operating system. Otherwise, leave this item at the default.
HDD S.M.A.R.T Capability (Disabled)
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system is a
diagnostics technology that monitors and predicts device performance. S.M.A.R.T.
software resides on both the disk drive and the host computer.
Video BIOS Shadow (Enabled0
This item determines whether the BIOS will be copied to RAM for faster execution.
Small Logo (EPA) Show (Disabled)
Enables or disables the display of the EPA logo during boot.
Advanced Chipset Features
These items define critical timing parameters of the motherboard. You should leave the
items on this page at their default values unless you are very familiar with the technical
specifications of your system hardware. If you change the values incorrectly, you may
introduce fatal errors or recurring instability into your system.
&'()
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
%
DRAM Clock/Timing Control
AGP & P2P Bridge Control
System BIOS Cacheable
Video RAM Cacheable
: Move
Enter: Select
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
F6:Fail-Safe Defaults
[Press Enter]
[Press Enter]
[Disabled]
[Disabled]
1 2
1 2 1 2
F7:Optimized Defaults
Using BIOS
Item Help
%
Menu Level
Advertisement
Table of Contents
