Motorola MVME956AC User Manual page 6

Regulatory Notices
!
Changes or modifications not expressly approved by
WARNING
Motorola Computer Group could void the user's authority to
operate the equipment.
Use only shielded cables when connecting peripherals to
assure that appropriate radio frequency emissions compliance
is maintained.
FCC (U.S.)
Both Class A (commercial) and Class B (residential) digital
devices have the following Federal Communications
Commission (FCC) wording on the regulatory label:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
In addition, Class B equipment will also have an FCC ID
number displayed such as: FCC ID: LNT6ØØADT. To
determine the classification of your equipment, examine the
FCC labels, which are readily visible on the exterior of the
cabinets (usually on the back or bottom). If all labels have
Class B ratings, the system is Class B. Any Class A label
makes the system Class A.
For FCC Class A
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential