Overview; Controls And Indicators - Motorola MVME956AC User Manual

Overview

This chapter provides a description of the controls, indicators, and
operating procedures for the MVME956AC chassis.
System operation using this chassis is completely dependent on your
choice of hardware and software. Therefore, the only operation discussed
here is a suggested basic power on/power off procedure.

Controls and Indicators

The MVME956AC chassis contains one control (switch). The switch has
an indicator (LED) that is powered by the +5 Vdc output from the power
supply. Some of the individual modules used in the chassis may also
contain controls and/or indicators. This manual describes only those that
are part of the chassis. For a description of other related controls and
indicators, refer to the documentation that came with your module(s).
The control provided for the MVME956AC chassis is an AC power
ON/OFF switch. With the switch in the OFF position, power to the
modules is removed but the primary side of the power supply remains
energized. This switch is located at the lower left front corner of the chassis
and provides a convenient means of powering the chassis up and down.
3Operating Procedures
3
3-1