Table of Contents
Advertisement
Replacement
1. Attach the stiffener to the backplane with the screws removed in
2. Position the backplane with the J1 and J2 connectors toward the
3. Attach the backplane to the chassis frame members with the screws
4. Attach the ends of the stiffener to the chassis using the screws
5. Attach the ground bus bar to the backplane with the screws removed
6. Connect all power wires removed in
7. Connect all cables removed in
8. Slide the card file back into position and attach with the screws
9. Install the modules removed in
10. Replace the top cover of the chassis with the screws removed in
11. Slide the MVME956AC chassis back into its rack mounting or
12. Connect all external cabling removed in
http://www.mcg.mot.com/literature
Step 11
above.
front of the chassis.
removed in
Step 10
above.
removed in
Step 9
above.
in
Step 8
above.
backplane.
removed in
Step
5.
4
above.
reinstall the top panel on your lab benchtop unit.
VME64x Bus Backplane
Step 7
above.
Step 6
above to the rear of the
Step 2
above.
Step 2
above.
5
Step
5-11
Advertisement
Table of Contents
