3. Remove the screws holding the top cover to the chassis and remove
4. Remove the power supply mounting screw from the right side of the
5. Disconnect the cable assemblies from the power supply or from the
6. Disconnect the +5V, +12V, -12V, and RTN wires from the
7. Slide the power supply assembly vertically up and out of the chassis.
http://www.mcg.mot.com/literature
the top cover.
chassis. Remove the additional screws from the back of the chassis.
backplane, if access to the power supply connections is difficult.
connections on the power supply.
Power Supply
5
5-3