Display Assembly - HP Compaq Mini CQ10 Maintenance And Service Manual

13. Release the top cover by lifting the front edge until it disengages from the base enclosure.
Reverse this procedure to install the top cover.

Display assembly

Description
25.7-cm (10.1-in) display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers
and cables (select models only), and webcam/microphone module and cable):
●
WSVGA, AntiGlare, LED display assembly in black for use only on Compaq Mini CQ10 LTE
computer models
●
WSVGA, anti-glare, LED display assembly in black for use only on Compaq-branded models
●
WSVGA, anti-glare, LED display assembly in black for use only on HP-branded models
●
WSVGA, anti-glare, LED display assembly in red
●
WSVGA, anti-glare, LED display assembly in blue
●
WSVGA, anti-glare, LED display assembly in white
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
c. Keyboard (see
d. Top cover (see
Battery on page 40).
Service access cover on page
Keyboard on page 55).
Top cover on page 58).
43).
Component replacement procedures
Spare part number
638150-001
634493-001
633496-001
633498-001
633499-001
633497-001
61