Top cover
NOTE:
The top cover includes the speakers, TouchPad and TouchPad cable.
Description
Top cover (includes TouchPad, TouchPad cable, and speaker)
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Service access cover (see
c.
Keyboard (see
Remove the top cover.
1.
Open the computer as far as possible.
2.
Remove the 2 Phillips 2.0×2.5 screws (1) that secure the interior hinge covers to the display
hinges.
NOTE:
58
Chapter 4 Removal and replacement procedures
Battery on page
Service access cover on page
Keyboard on page
The screws used for these hinge covers require a Phillips 00 screwdriver.
40).
55).
Spare part number
633488-001
43).