Bluetooth Module - HP MINI 5103 Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module
Before removing the Bluetooth module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC Adapter from the computer.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the following components:
a. Keyboard (see
b. Hard drive (see
c. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1).
2. Release the Bluetooth module from the adhesive pad to which it is affixed (2), and remove the
Bluetooth module.
Reverse this procedure to install the Bluetooth module.
Battery on page 38).
Keyboard on page 43)
Mass storage devices on page
Top cover on page 56)
SIM on page 39).
50)
Component replacement procedures
Spare part number
537921-001
63