HP MINI 5103 Maintenance And Service Manual page 100

Select
Built-In Device Options
92 Chapter 5 Computer Setup
To do this
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable embedded WLAN device radio (select
models only; enabled by default).
●
Enable/disable the Network Interface Controller (LAN)
(enabled by default).
●
Enable/disable the embedded Bluetooth device radio
(enabled by default).
●
Enable/disable LAN/WLAN switching (disabled by
default).
● Enable/disable LAN Power Save (select models only).
When enabled, saves power by turning off the LAN
when not in use (enabled by default).
●
Set the wake on LAN state. Options include the
following:
◦
Disabled
◦
Boot to Network
◦ Follow Boot Order
●
Enable/disable the Notebook Upgrade Bay device
(enabled by default).
●
Enable/disable the Power Monitor Circuit (enabled by
default).
●
Enable/disable the audio devices (enabled by default).
●
Enable/disable the fingerprint device (enabled by
default).
● Enable/disable a modem device (enabled by default).
●
Enable/disable the microphone (enabled by default).
●
Enable/disable the internal speakers (enabled by
default).