Speaker - HP MINI 5103 Maintenance And Service Manual

Speaker

Description
Speaker assembly with cable
Before removing the speaker assembly:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the
device on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the memory module (see
7. Remove the keyboard (see
8. Remove the hard drive (see
9. Remove the top cover (see
Remove the speaker assembly:
1. Turn the top cover upside down, with the front toward you.
2. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure the assembly to the top cover, and
remove the speaker assembly (2) from the top cover.
NOTE:
speaker alignment pins (3).
Reverse this procedure to install the speaker assembly.
Battery on page
Keyboard on page
Mass storage devices on page
Top cover on page
If seated tight, work the speaker back and forth to release the speaker from the
38).
Memory module on page
43).
56).
Component replacement procedures
Spare part number
577967-001
SIM on page 39).
40).
50).
59