Axis 5400plus User Manual page 91

Viewing
the Account File
Viewing
the Status File
AXIS 5400+ / AXIS 5600+ User's Manual
connected to npserver.
220 AXIS 5600+ (rev 3) FTP Network Print Server V7.00
Sep 06 2004 ready.
User (npserver:(none)): root
331 User name ok, need password
Password: pass
230 User logged in
ftp> get config
200 PORT command successful.
150 Opening data connection for config
(192,168,0,10,4,64), (mode ascii).
226 Transfer complete.
ftp: 10527 bytes received in 0.22Seconds 47.85
Kbytes/sec
ftp> put config CONFIG
200 PORT command successful.
150 Opening data connection for CONFIG
(192,168,0,10,4,65), (mode ascii).
226 Transfer complete.
10527 bytes received in 0.22Seconds 47.85 Kbytes/sec
ftp> bye
221 Goodbye.
>
The account file contains data concerning the ten last print jobs. It
specifies an internal job number, the user that initiated the job, the
protocol and logical printer that was used, current status (Completed, Off-
line, or Printing), number of bytes printed, elapsed time and off-line time.
Follow the instructions below to view the account file using FTP:
1. Log in to the Axis Network Print Server by typing:
or
ftp <host name>
and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. Download the account file to your host by typing:
get account
4. View the account file using your preferred text editor.
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using FTP:
1. Log in to the Axis Network Print Server by typing:
or
ftp <host name>
and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
Management and Configuration
(not visible)
in a DOS windows (Windows
ftp <IP address>
in a DOS windows (Windows
ftp <IP address>
and .)
root pass
and .)
root pass
91