Axis 5400plus User Manual page 127

IP Address Check with
Ping
Windows:
UNIX/Linux and
Mac OS X
Replies:
AXIS 5400+ / AXIS 5600+ User's Manual
By sending a data packet to a specific IP address and waiting for a reply,
Ping can determine whether that IP address is accessible. Ping can also
help you to determine IP address conflicts with your AXIS 5400+/AXIS
5600+ and troubleshoot TCP/IP problems on the network. Follow the
instructions below to diagnose your problem.
Open a Command Prompt and enter the following commands:
Syntax
ping <IP address>
The host will return
reply from 192.168.3.191
indicates that the address has been set and that communication is
established
Open a Terminal and enter the following commands:
Syntax
ping <IP address>
The host will return
psname is alive
the address has been set and that communication is established.
Subsequent replies will provide an explanation of the cause of the problem.
Replies from DOS can be interpreted as defined in the table below (for
UNIX/Linux replies please refer to the UNIX/Linux chapter of this manual):
Ping Reply
Axis Network Print Server connected
The AXIS 5400+/AXIS 5600+ is re-
sponding correctly. There are probably
bytes = 32 time = 2 ms......
no conflicts with the IP address - dis-
- or something similar
connect the AXIS 5400+/AXIS 5600+
and ping again to verify.
destination host The AXIS 5400+/AXIS 5600+ is not ac-
unreachable cessible. Check your network settings.
The IP address is not in use. You are
either pinging the wrong IP address or
request timed out
your AXIS 5400+/AXIS 5600+ does not
have the correct IP address.
no response from The AXIS 5400+/AXIS 5600+ is not ac-
ping command cessible. Check your network settings.
Example
ping 192.168.3.191
, or a similar message. This
Example
ping 192.168.3.191
, or a similar message. This indicates that
Interpretation and recommendation
Axis Network Print Server
disconnected
The IP address is already in use and
cannot be used again. You must obtain
a new IP address for your AXIS
5400+/AXIS 5600+.
—
This IP address is not used by anyone
and is available for use for your AXIS
5400+/AXIS 5600+. Set the IP address
again, power on the AXIS 5400+/AXIS
5600+ and then try accessing the unit.
—
Troubleshooting
127