Axis 5400plus User Manual page 80

Updating the Firmware
Upgrading using FTP
Caution!
80
7. If you do not have a default password, just click Next >. If some of your
servers use a different User ID or Password than the default entries, they will
be displayed in the Remaining servers list. Enter the User ID and Password
for each individual server. Click Next >.
8. Name the upgrade job. This is optional, so you can leave the field blank if
you want. Click the Start button to start the upgrading job.
9. You can view the progress of the job in the Event Log.
Refer to "Using AXIS ThinWizard for Print Server Management" on page
87, for more information about AXIS ThinWizard.
To upgrade over the network using FTP you will need a file with the new
print server firmware. The name of this file is in the form
.
product_version.bin
Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may
have to be re-initialized by your dealer.
The objective of this example is to upgrade a print server with firmware
version 6.41 to firmware version 7.00.
The description below from a typical Windows session uses the following
examples:
• Print server model: AXIS 5400+
• IP address of print server: 10.13.4.105
• New firmware version name: 5400p_v2_7_00.bin
• Location of firmware and upgrade procedure: C:\Axis (Create a new
directory named e.g. 'Axis' on your hard drive and download the
firmware to that location).
AXIS 5400+ / AXIS 5600+ User's Manual