Automatic Ip Address Assignment - Axis 5400plus User Manual

Basic Installation
Notes:

Automatic IP Address Assignment

Obtain an IP Address
with DHCP
Obtain an IP Address
using BOOTP
in UNIX/Linux
14
• The ability to set the IP address with ARP and PING will only be enabled the first 10
minutes after restarting the print server.
• You need root privileges on your UNIX, Linux and Mac OS X system, or administrator
privileges on a Windows NT server to set the IP address using RARP, BOOTP, DHCP and to
add an entry to the ARP table with the command 'arp -s'.
• When assigning an IP address manually, you must utilize a unique IP address that is not
already in use in your network.
If you have a DHCP server on your network, your print server will
automatically obtain an IP address when you connect it physically to the
network. The IP address will appear on the test page that is printed when
you press the test button once.
Below is an example of how to set the IP address of the print server using
BOOTP. Append the following entry to your boot table. This is typically
performed by editing the file:
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<IP address>:\
:sm=<subnet mask>:gw=<gateway field>
Example:
npsname:ht=ether:vm=rfc1048:\
:ha=00408c100086:ip=192.168.3.191:\
:sm=255.255.255.0:gw=192.168.1.1
1. If necessary, update your host table and alias name databases as required
by your system.
2. If it is not already running, start the BOOTP daemon. This is typically
performed using the
3. Restart the print server to download the IP address, default router address,
and subnet mask. The print server can automatically download a customized
config file from a TFTP server. Just add the name of the config file and the
TFTP server's IP address to your boot table. The config file is downloaded
immediately after the print server receives its IP address.
4. You have now successfully set the IP address of the print server. Proceed to
"Making Network Printers available for printing on your PC" on page 17.
/etc/bootptab
command.
bootpd
AXIS 5400+ / AXIS 5600+ User's Manual