TP-Link TD-8817 User Manual page 54

Other operation for the entries as shown in Figure 4-35:
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry.
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule,
and then click the DELETE button to delete the entry.
4.5.2.2. MAC Filter
Select IP/MAC Filter as the Filter type, and select MAC as the Rule type (shown in Figure 4-36),
then you can configure the filter rules based on MAC address.
Rule Type: Select MAC for the MAC Filter rule.

 Active: Select "Yes" to make the rule to take effect.
 MAC Address: Enter the MAC address for the rule.
 Rule Unmatched: If the current rule can not match, and you select Forward, the modem
router will skip the rule and transmit directly. If you select Next, the modem router will find the
next filter rule (show in Filter list) to match.
IP/MAC Filter Listing: This displays the information about the MAC Filter rules.

To add a MAC Address filtering entry:
For example: If you want to block the PCs with MAC addresses 00-0A-EB-00-07-BE and
00-0A-EB-00-07-5F to access the Internet, you can configure as follows. Presume the rules are
both aimed at the interface PVC0, and their indexes are (1, 1) and (1, 2).
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
Figure 4-36
47