Lan - TP-Link TD-8817 User Manual

enable the function, please click Enable.
 MLD Proxy: The MLD (Multicast Listener Discovery Protocol) Proxy function is disabled by
default. If you want to enable the function, please click Enable.
 Dual Stack Lite: Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by
default.
4. Bridge Mode
If you select this type of connection, the modem router can be configured to act as a bridging
device between your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN.
 Dual Stack Lite: Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by
default.

Note:
After you finish the Internet configuration, please click SAVE to make the settings take effect.
4.3.1.3. IPv4/IPv6
If you select IPv4/IPv6 as IP version, please follow both the
configuration based on different connection types to configure the parameters for WAN ports.

4.3.2 LAN

Choose "Interface Setup→LAN" menu, and you will see the LAN screen (shown in Figure 4-15).
Please configure the parameters for LAN ports according to the descriptions below.
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
Figure 4-14
28
4.3.1.1 IPv4 and 4.3.1.2 IPv6