System Board - HP COMPAQ 6510B Maintenance And Service Manual

System board

Description
For use with HP Compaq 6515b computer models with WWAN capability (includes WWAN module
slot)
For use with HP Compaq 6515b computer models without WWAN capability (does not include
WWAN module slot)
For use with HP Compaq 6510b computer models with WWAN capability (includes WWAN module
slot)
For use with HP Compaq 6510b computer models without WWAN capability (does not include
WWAN module slot)
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/WLAN module compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Switch cover (see
f. Fan (see
g. Heat sink (see
h. Display assembly (see
i. Top cover (see
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
SIM (see
●
Memory modules (see
on page
●
WLAN module (see
●
RTC battery (see
86 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Fan on page 69)
Heat sink on page
Display assembly on page
Top cover on page
SIM on page 47)
Expansion memory module on page
65)
WLAN module on page
RTC battery on page
46).
50)
Expansion memory module on page
60)
62)
68)
71)
75)
79)
54) and
56)
66)
Spare part number
443896-001
443898-001
446905-001
446904-001
Internal memory module
54)