g.
Heat sink (see
h.
Display assembly (see
i.
Top cover (see
j.
System board (see
k.
PC Card/audio board assembly (see
Remove the modem module:
1.
Turn the PC Card/audio board assembly upside down.
2.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the modem module to the PC Card/
audio board assembly.
3.
Lift the modem module (2) straight up and remove it.
Reverse this procedure to install the modem module.
Heat sink on page
71)
Display assembly on page
Top cover on page
79)
System board on page
PC Card/audio board assembly on page
75)
86)
Component replacement procedures
89)
91