Quick Reference; Arming The System; Disarming The System; Arm System/Stay Inside - Honeywell OMNI-408 User Manual

Quick Reference

Arming the System

Check to make sure the system is ready — Green READY LED is lit.
Enter your 4-digit User Code (or press the ARM button on your
keyfob).
The ARMED LED goes on.
Exit through a door designated by your installer as an exit/entry door.

Disarming the System

Enter through door designated by your installer as an exit/entry door.
Enter your 4-digit User Code (or press the DISARM button on your
keyfob).
The ARMED LED goes out.

Arm System/Stay Inside

Check to make sure the system is ready — Green READY LED is lit.
Press
The ARMED and STAY LEDs light.
You must disarm the system if you want to open the door or leave the premises
after the exit time has passed.

Arm System/Stay Inside/Instant Mode

Check to make sure the system is ready — Green READY LED is lit.
Press
The ARMED, INSTANT, and STAY LEDs are all lit.

Smoke Detector Reset

Enter your 4-digit User Code.
– 4 –
STAY followed by your User Code.
INSTANT then STAY followed by your User Code.