Chapter 27: Solving Print Quality Problems - IBM Infoprint 1125 User Reference

27
If the suggested corrective action does not fix the problem, call your service representative.
Problem
Print is too light.
Toner smears or print comes
off the page.
Toner appears on the back of
the printed page.
Argecy Computer Corporation 248-324-1800
Solving print quality problems
Action
• The toner may be low. To utilize the remaining toner, remove the cartridge by
gripping the handles with both hands. With the cartridge arrows pointing
downward, shake the print cartridge back and forth. Reinstall the cartridge
and then press Go.
• Change the
• If you are printing on an uneven print surface, change the Paper Weight and
Paper Texture settings in the Paper Menu. See
• Verify that the correct print material is being used.
• If you are printing on an uneven print surface, change the Paper Weight and
Paper Texture settings in the Paper Menu. See
• Verify that the print material is within the printer specifications. See
material specifications
• If the problem continues, call a service technician.
Toner is on the transfer roll. To help prevent this, do not load print material that is
smaller than the page size of the job to be printed.
Open and close the printer upper front door to run the printer setup cycle and
clean the transfer roll.
Toner Darkness setting in the Quality Menu.
for more details.
74
Paper Type.
Paper Type.
Print