IBM Infoprint 1125 User Reference page 128

PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the infrared port requires it, regardless of the default printer language.
Values:
On*
Off
See also:
PCL
Transmit Delay
Purpose:
To define the amount of time, in seconds, the printer must wait before transmitting meaningful infrared
data to the host computer, as well as the amount of time the printer requests that the host computer
wait before transmitting infrared data.
Values:
Auto*
None
1...15
Argecy Computer Corporation 248-324-1800
Printer examines data on the infrared interface and selects PostScript emulation if the data
indicates that is the required printer language.
Printer does not examine the incoming data. The printer uses PCL emulation to process the
job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup
Menu if PCL SmartSwitch is Off.
SmartSwitch; Printer Language
Printer sets the Transmit Delay value during a power-on reset to maximize link
performance (recommended).
No delay is imposed by the printer. However, not all host computers can communicate
without some transmission delays.
User selects a Transmit Delay value between 1 and 15 seconds. If you have trouble
printing using the infrared port, selecting a high Transmit Delay value, such as 15, may
resolve the problem.
125