Robust Xon - IBM Infoprint 1125 User Reference

PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the serial port requires it, regardless of the default printer language.
Values:
On*
Off
See also:
PCL

Robust XON

Purpose:
To determine whether the printer communicates availability to the computer.
Values:
Off*
On
This menu item only applies to the serial port if Serial Protocol is set to XON/XOFF.
See also:
RS-232/RS-422
Purpose:
To specify the type of serial communication.
Values:
RS-232*
RS-422
Argecy Computer Corporation 248-324-1800
Printer examines data on the serial interface and selects PostScript emulation if the data
indicates that is the required printer language.
Printer does not examine the incoming data. The printer uses PCL emulation to process the
job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup
Menu if PCL SmartSwitch is Off.
SmartSwitch; Printer Language
Printer waits to receive data from the computer.
Printer sends a continuous stream of XONs to the host computer to indicate that the serial
port is ready to receive more data.
Note: Selecting RS-422 automatically sets Serial Protocol to XON/XOFF.
161