Network Menu - IBM Infoprint 1422 User Manual

Menu item Purpose
Protocol To specify the parallel interface
protocol.

Network Menu

Use the Network Menu to change printer settings affecting jobs sent to the printer through a network
port (either Standard Network or Network Opt <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Menu item Purpose
MAC Binary
To configure the printer to process
Macintosh binary PostScript print
PS
jobs.
Network
To configure the size of the
network input buffer.
Buffer
Note: Changing the Network
Buffer menu item automatically
resets the printer.
Understanding the operator panel
Using the printer menus
98
Values
Standard May resolve some parallel
interface problems.
Fastbytes* Provides compatibility with most
existing parallel interface
implementations (recommended
setting).
Values
On Printer processes raw binary
PostScript print jobs from
computers using the Macintosh
operating system.
Note: This setting often causes
Windows print jobs to fail.
Off Printer filters PostScript print jobs
using standard protocol.
Auto* Printer processes print jobs from
computers using either Windows
or Macintosh operating systems.
Auto* Printer automatically calculates the
Network Buffer size
(recommended setting).
3K to User specifies the Network Buffer
maximum size size. The maximum size depends
allowed on the amount of memory in your
printer, the size of the other link
buffers, and whether Resource
Save is set to On or Off. To
maximize the range for the
Network Buffer size, disable or
reduce the size of the parallel,
serial, and USB buffers.