IBM Infoprint 1422 User Manual page 110

Message
32 Unsupported
Print Cartridge
34 Short Paper
35 Res Save Off
Deficient Memory
37 Insufficient Collation
Area
37 Insufficient Defrag
Memory
Understanding the printer messages
What this message means
An unsupported print cartridge is
installed.
The printer has determined that the
length of the paper in the source
specified on the second line of the
display is too short to print the
formatted data. For auto-size sensing
trays, this error occurs if the guides are
not in the correct position.
The printer lacks the memory needed
to enable Resource Save. This
message usually indicates too much
memory is allocated for one or more of
the printer link buffers.
The printer memory (or hard disk, if
installed) does not have the free space
necessary to collate the print job.
The printer cannot defragment flash
memory, because the printer memory
used to store undeleted flash
resources is full.
Understanding the printer messages
What you can do
Remove the print cartridge and install
a new one.
See also:
cartridge
• Press Go to clear the message and
continue printing. The printer does
not automatically reprint the page
that prompted the message.
• Make sure the Paper Size setting in
the Paper Menu is correct for the
size paper you are using. If MP
Feeder Size is set to Universal,
make sure your paper is large
enough for the formatted data.
• Press Menu to open the Job Menu
and cancel the current job.
See also:
specifications
• Press Go to disable Resource Save
and continue printing.
• To enable Resource Save after you
get this message:
– Make sure the link buffers are set
to Auto, and exit the menus to
activate the link buffer changes.
– When Ready is displayed, enable
Resource Save from the Setup
Menu.
• Install additional memory.
• Press Go to print the portion of the
job already stored and begin
collating the rest of the job.
• Press Menu to open the Job Menu
and cancel the current job.
See also:
• Delete fonts, macros, and other data
in printer memory.
• Install additional printer memory.
108
Changing the print
Print media sources and
Canceling a print job