1Preset Setup - Jaycar Electronics N56 Series User Manual

In Figure 4-36, click page switch button, the interface is shown as in Figure 4-40.
X 3 2 8 H 3 2 8 H 3 2 8 H
Here you can activate the following functions:
Preset
Tour
Pattern
Auto scan
Auto pan
Flip
Reset
Page switch
Note:
Preset, tour and pattern all need the value to be the control parameter. You can define it as
you require.
You need to refer to your speed dome user's manual for Aux definition. In some cases, it
can be used for special process.
The following setups are usually operated in the

4.9.1Preset Setup

In Figure 4-36, use eight direction arrows to adjust camera to the proper position.
In Figure 4-39, click preset button and input preset number. The interface is shown as in Figure
4-41.
Now you can add this preset to one tour.
Figure 4-39
Figure 4-40
F igure 4-36, Figure 4-39 and Figure 4-40.
X 3 3 2 H 3 3 2 H 3 3 2 H
75