Hdd Information; Bps - Jaycar Electronics N56 Series User Manual

5.6.1 HDD Information

Here is to list hard disk type, total space, free space, video start time and status. See See Figure
X 3 9 1 H 3 9 1 H 3 9 1 H
5-50.○ means current HDD is normal. X means there is error. - means there is no HDD.
If disk is damaged, system shows as "?". Please remove the broken hard disk before you add a
new one.
Once there is a hard disk confliction, please check hard disk time and system time is the same or
not. Please go to setting then general to modify system time. At last, reboot the system to solve
this problem.
After system booted up, if there is any confliction, system goes to HDD information interface
directly. Please note, system does not ask you to deal with it forcedly.
When HDD confliction occurs, you can check system time and HDD time are identical or not. If
they are not identical, please go to General (Chapter 5.3.1) to adjust system time or go to HDD
Management (Chapter 5.5.1) to format HDD and then reboot the DVR.
Figure 5-50
Tips:
Please click Fn button or left click mouse to view HDD record time and HDD type and time.

5.6.2 BPS

Here is for you to view current video data stream (KB/s) and occupied hard disk storage (MB/h).
See Figure 5-51.
106