Detect; Go To Detect Menu; Motion Detect - Jaycar Electronics N56 Series User Manual

Standalone dvr

Table of Contents

Select search

engine here

You can see result here. Double click

file name, you can view the image

content.

4.5 Detect

In the main menu, from Setting to Detect, you can see motion detect interface. See Figure

4-20.There is three detection types: motion detection, video loss, camera masking.

Detection menu is shown as below. See Figure 4-20

Event type: from the dropdown list you can select motion detection type.

Channel: select the channel to activate recording function once alarm occurred. Please make

sure you have set MD record in encode interface(Main Menu->Setting->Schedule) and

schedule record in manual record interface(Main Menu->Advanced->Manual Record)

Latch: when motion detection complete, system auto delays detecting for a specified time.

The value ranges from 10-300(Unit: second)

Region: Click select button, the interface is shown as in Figure 4-21. Here you can set

motion detection zone. There are 396(PAL)/330(NTSC) small zones. The green zone is

current cursor position. Grey zone is the motion detection zone. Black zone is the disarmed

zone. You can click Fn button to switch between the arm mode and disarm mode. In arm

mode, you can click the direction buttons to move the green rectangle to set the motion

detection zone. After you completed the setup, please click ENTER button to exit current

setup. Do remember click save button to save current setup. If you click ESC button to exit

the region setup interface system will not save your zone setup.

Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.

Figure 4-19

Select a file and then

click here to view

image content.

There are max 100 files in one

page. Click here to view more.

Table of Contents