ADTRAN Total Access OC-3 L3 Installation And Maintenance Practice page 37

B
5. Test
6. Performance
Monitoring
7. Protection
Configuration
8. STS-1 Mapping
9. DS1 Mapping Status
10. Path Trace
11. Synchronization
Messages
12. Display Options
61181031L3-5A
1. OC-3 Line Loop
2. OC-3 Local Loop
3. DS3 #1 Line Loop
4. DS3 #1 Local Loop
5. DS3 #2 Line Loop
6. DS3 #2 Local Loop
7. DS1 Line Loops
8. Remove All Loops
1. Clear Error Summary
2. Reset Performance Registers
3. OC-3 Section and Line
4. STS-1 Path #1
5. STS-1 Path #2
6. STS-1 Path #3
7. DS3 #1
8. DS3 #2
Mux Operational Status
2. Mux APS Lockout Status
3. Perform Mux APS switch
DS3 #1 Operational Status
6. DS3 #1 APS Lockout Status
7. Perform APS switch on DS3 #1
DS3 #2 Operational Status
10. DS3 #2 APS Lockout Status
11. Perform APS switch on DS3 #2
1. Show Path Traces
2. Send Path Trace
Primary External Clock
Secondary External Clock
B Fiber Reception
B Fiber Transmission
1. High ASCII Characters
2. Screen Height
3. Screen Width
Figure B-1. OC-3 MUX Menu Tree (continued)
1. Not Looped
2. Looped
B1
1. DS3 #1 Daily
2. DS3 #1 Quarter Hourly
3. Reset Performance
Registers for DS3 #1
Online
Offline
1. Allow
2. Inhibit
Online
Offline
1. Allow
2. Inhibit
Online
Offline
1. Allow
2. Inhibit
1. Disabled
2. Enabled
Line Code Violations
Line Errored Seconds
Line Severely Errored Seconds
Line Unavailable Seconds
Line Fault Coun
B-3