Figure 3.17: Oscar Interface User Status Dialog Box; Figure 3.18: Oscar Interface Disconnect Dialog Box - Avocent AutoView 3200 Installer/User Manual

34 AutoView 3050/3100/3200 Switch Installer/User Guide

Figure 3.17: OSCAR Interface User Status Dialog Box

To disconnect a user:
1. If the OSCAR interface is not open, press
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.17.
3. Click the letter corresponding to the user to disconnect. The Disconnect dialog box will appear
as shown in Figure 3.18.

Figure 3.18: OSCAR Interface Disconnect Dialog Box

4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press
NOTE: If the User Status list has changed since last displayed, the mouse cursor will turn into an hourglass as
the list is automatically updated. No mouse or keyboard input will be accepted until the list update is complete.
Escape to exit the dialog box without disconnecting a user.
to open the Main dialog box.
Print Screen