Adjusting Mouse Settings On Target Devices - Avocent AutoView 3200 Installer/User Manual

• The STATUS LED indicates that a valid selection has been made to an AutoView 3050/3100/
3200 switch.
The serial IQ module prevents a serial break from the attached device if the module loses power.
However, a user can generate a serial break with the attached device by pressing
accessing the Terminal Applications menu.

Adjusting Mouse Settings on Target Devices

Before a computer connected to the AutoView 3050/3100/3200 switch can be used for remote user
control, you must set the target mouse speed and turn off acceleration. For machines running
Microsoft Windows
®
To ensure that the local mouse movement and remote cursor display remain in sync, mouse
acceleration must be set to "none" for all user accounts accessing a remote system through a KVM
switch. Mouse acceleration must also be set to "none" on every remote system. Special cursors
should not be used and cursor visibility options, such as pointer trails,
animations, cursor shadowing and cursor hiding, should also be turned off.
(Windows NT , 2000, XP, Server 2003), use the default PS/2 mouse driver.
® ®
Chapter 2: Installation
after
Alt-B
key cursor location
Ctrl
11