Avocent AutoView 3200 Installer/User Manual page 96

84 AutoView 3050/3100/3200 Switch Installer/User Guide
Table D.1: AutoView 3050/3100/3200 Switch Product Specifications (Continued)
Type
Connector
Local Port
Number
Type
USB Device Port
Number
Type
Power Supply
Type
Power
Heat Dissipation
AC-input Range
AC Frequency
AC-input Current Rating
AC-input Power (maximum)
AC-input Cable
Ambient Atmospheric Condition Ratings
Temperature
Humidity
Safety and EMC Standards
Approvals and Markings
10/100/1000 Ethernet
8-pin modular
1
PS/2, USB and VGA
4
USB 1.1
Internal
AutoView 3100: 11.0 W
AutoView 3200: 13.0 W
AutoView 3100: 37.5 BTU/hr
AutoView 3200: 44.4 BTU/hr
100 - 240 VAC
50 - 60 Hz autosensing
0.5 A
For Autoview 3100/3200 switches: 40 W
For AutoView 3050 switch: 25W
18 AWG three-wire cable, with a three-lead IEC-320; receptacle on the power
supply end and a country-dependent plug on the power resource end
32 to 104 degrees Fahrenheit (0 to 40 degrees Celsius) operating;
-4 to 158 degrees Fahrenheit (-20 to 70 degrees Celsius) nonoperating
10 - 95% noncondensing
UL, FCC, cUL, ICES-003, CE, GS, VCCI, MIC, C-Tick, GOST
Safety certifications and EMC certifications for this product are obtained under
one or more of the following designations: CMN (Certification Model Number),
MPN (Manufacturer's Part Number) or Sales Level Model designation. The
designation that is referenced in the EMC and/or safety reports and certificates
are printed on the label applied to this product.