Planning A Route Using A Mapcode - TomTom Go Reference Manual

Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
7. Select a suggestion for your destination.
8. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the
time of arrival is the local time at your destination.
Tip: You can
add a stop to a route
Tip: You can save a route using

Planning a route using a mapcode

Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using a mapcode, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Search.
The search screen opens with the keyboard showing.
3. Type in your mapcode. You can enter any of these mapcode types:
International, for example, WH6SL.TR10.

Country-specific, for example, GBR 8MH.51.

Alternative country-specific, for example, GBR 28.Y6VH or GBR LDGZ.VXR.

Tip: All the mapcodes in this example are for the same location - Edinburgh Castle in the UK.
See About mapcodes
4. As you type in the mapcode, suggestions are shown based on what you have entered. You
can continue typing or select a suggestion.
Towns and roads are shown on the left, POIs are shown on the right.
Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
guidance view is shown automatically.
that you have already planned.
My Routes.
for information on how to get a mapcode for a location.
arrival information
45
panel. The estimated