Planning A Route Using A Mapcode - TomTom BRIDGE User Manual

Tip: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
7. Select a suggestion for your destination.
The location is shown on the map.
8. To plan a route to this destination, select Drive/Ride, depending on which device you are using.
A route is planned and then guidance to your destination begins. As soon as you start driving,
the guidance view
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the
time of arrival is the local time at your destination.
Tip: You can add a stop to a route
Tip: You can save a route using

Planning a route using a mapcode

QUICK SEARCH ONLY
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using a mapcode, do the following:
1. Select the Main Menu button to open the Main Menu.
2. Select Drive to.
The search screen opens with the keyboard showing.
3. Type in your mapcode. You can enter any of these mapcode types:
International, for example, S8VXZ.PJZ2.

Country-specific, for example, USA WW6G.S9GT.

Alternative country-specific, for example, DC LQ.FR or DC JJ.1B2.

Tip: All the mapcodes in this example are for the same location - the US Capitol building in
Washington DC, USA. See
location.
4. When the full map code has been entered, the location is shown in the Addresses column.
Towns and roads are shown on the left, POIs are shown on the right.
Tip: To see more results, hide the keyboard or scroll down the results list.
is shown automatically.
that you have already planned.
My Routes.
About mapcodes
arrival information
for information on how to get a mapcode for a
panel. The estimated
80