Planning A Route Using The Map - TomTom Go Reference Manual

Tip: To see more results, hide the keyboard or swipe the results list to scroll it.
Note: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
5. Select a POI type or an individual POI.
6. If you selected a POI type, select your chosen POI.
7. Select Drive.
Your navigation device plans a route then starts to guide you to your destination. As soon as
you start driving, the
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the
time of arrival is the local time at your destination.
Tip: You can add a stop to a route
Tip: You can save a route using

Planning a route using the map

Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using the map, do the following:
1. Move the map until you can see the destination that you want to navigate to. Here are some of
the gestures you can use to move the map:
Pinch - to zoom, touch the screen with your thumb and a finger. Move them apart to zoom

in or move them together to zoom out.
Double tap - to zoom in, double tap on the map.

Drag - to scroll the map, touch the screen with a finger and move it across the screen.

Flick - to scroll the map a long way, flick the tip of a finger across the screen.

Tip: For a complete list of gestures, see
guidance view is shown automatically.
that you have already planned.
My Routes.
Using
arrival information
gestures.
41
panel. The estimated