Antenna - HP EliteOne 800 G1 Maintenance & Service Manual

Antenna

Description
Antenna kit
The antenna route from the WLAN card to transceivers at the top of the computer (transceivers shown in
following image).
To remove the antenna:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the heat sink (see
4. Remove the top rear trim (see
Preparing to disassemble the computer on page
Access panel on page
Heat sink – Graphics board and processor on page
Top rear trim on page
40).
68).
Spare part number
733499-001
34).
62).
Antenna
71