Webcam Module - HP EliteOne 800 G1 Maintenance & Service Manual

Webcam module

You can disable the webcam in F10 Setup by disabling accessory USB port 5. See
Security on page 111
Description
Webcam module for use in non-touchscreen models
Webcam module for use in touchscreen models
On products that ship with a webcam module, the module is located at the top of the computer beneath
the top rear trim. It is housed in a metal bracket that is secured with two Phillips screws. the webcam
module has one connector.
The webcam module is optional.
To remove the webcam module:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the top rear trim (see
for more information.
Access panel on page
Top rear trim on page
Preparing to disassemble the computer on page
40).
68).
Computer Setup—
Spare part number
732510-001
736499-001
34).
Webcam module
69