Cycle Guide; Timed Dry Cycles - Maytag 4GMEDC100 Use And Care Manual

CYCLE GUIDE — AUTOMATIC DRY CYCLES
AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Heavy or bulky
items
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High Heavy temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Delicate to Medium Casual temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level:
Temperature
Fabric:
High Heavy
More Dry
Energy Preferred
Less Dry
More Dry Medium Casual
Energy Preferred
Less Dry
More Dry Low Delicate
Energy Preferred
Less Dry
Cycle: Temperature:
High Heat High
Low Heat Low
Freshen Up
Air Fluff No Heat
Available
Options:
Temperature/Fabric
End of Cycle Signal
Temperature/Fabric
End of Cycle Signal
Temperature/Fabric
End of Cycle Signal
Available
Options:
Temperature/Fabric
End of Cycle Signal
Temperature/Fabric
End of Cycle Signal
Any Temperature/Fabric
End of Cycle Signal
End of Cycle Signal
Use the Air Fluff (no heat) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Automatic cycles give the best drying
in the shortest time. Drying time varies
based on fabric type, load size, and
dryness setting.
Select a drying temperature based on
the fabrics in your load. If you are unsure
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
Cycle Details:
Completes drying if items are still damp.
Use low to medium temperature to
smooth out wrinkles, such as those
found in clothes packed in a suitcase or
in items wrinkled from being left in the
dryer too long.
No heat drying.