Table of Contents
Advertisement
Appendix
Updating the firmware
Connect the camera to the computer and update the firmware of the
camera of the lens.
•
You cannot run a firmware upgrade without a fully charged battery. Recharge
the battery fully before running a firmware upgrade.
•
If you update the firmware, user settings and values will be reset. (Date, time,
language, and video out will not change.)
•
Do not turn the camera off while the update is in progress.
1
Turn off the camera.
2
Connect your camera to the computer with the USB cable.
•
You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
•
If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
3
Turn on the camera.
4
On the computer, select i-Launcher
5
Follow the on-screen instructions to download the firmware to
the camera.
•
You can download the firmware of the camera or the lens.
6
Turn off the camera when the download completes.
7
Remove the USB cable.
8
Turn on the camera.
q
9
Press [m]
Device Information
Update
Body Firmware
10
Select Yes from a pop-up window on the camera to update
the firmware.
Firmware Upgrade.
Software
or
.
Lens Firmware
195
Advertisement
Table of Contents
