Flash - Samsung NX30 User Manual

Shooting Functions

Flash

Flash Flash
Shooting Functions > Shooting Functions >
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a flash and
supply a constant amount of light. Select appropriate settings according to
a light source and a subject.
In Shooting mode, press [m]
To set flash options,
an option.
Icon Description
Off: Do not use the flash.
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
A
environment.
Auto: The flash automatically fires in dark places.
A
Auto Red-eye: The flash automatically fires and reduces red-eyes.
Fill in: The flash fires whenever you capture a photo. (Brightness is
automatically adjusted.)
Fill-in Red: The flash fires whenever you capture a photo and
reduces red-eyes.
1st Curtain: The flash fires
immediately after the shutter opens.
The camera captures a photo of a
subject earlier in an action sequence
clearly.
Icon
b
Flash
Ball moving direction
Description
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Hi-speed: If the shutter speed is faster than the camera's sync
speed (the quickest time taken to open and close the shutter), the
flash will fire multiple times at high speed. The flash starts to fire
H
while the shutter opens. This option can be set only when you
attach a compatible, optional external flash. (SEF580A)
•
The available options may differ depending on shooting conditions.
•
There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
•
If you select Off, the flash does not fire even when an external flash is
attached. If you adjust the flash intensity manually, the flash will fire once
without a pre-flash.
Use only Samsung-approved flashes. Using incompatible flashes may damage
your camera.
Ball moving direction
101 101