Table of Contents
Advertisement
Connecting to external devices
Viewing files on an HDTV or 3D TV
Play back photos or videos by connecting your camera to an HDTV (3D TV)
using an optional HDMI cable.
Viewing files on an HDTV
1
In Shooting or Playback mode, press [m]
HDMI Output
an option. (p. 171)
2
Turn off your camera and HDTV.
3
Connect your camera to your HDTV with the optional HDMI
cable.
4
Turn on your HDTV, and then select the HDMI video source.
5
Turn on the camera.
6
View photos or play videos using the camera buttons.
•
•
q
•
•
•
•
•
•
•
When using the HDMI cable, you can connect the camera to an HDTV using
the Anynet+(CEC) method.
The Anynet+(CEC) functions allow you to control connected devices using the
TV remote control.
If the HDTV supports Anynet+(CEC), the TV turns on automatically when used
in conjunction with the camera. This feature may not be available on some
HDTVs.
You can capture a photo or video when the camera is connected to an HDTV,
but some functions are limited. Shooting functions are supported only when
HDMI Output is set to 1080p or Auto on the camera and the TV's HDMI
output option is set to 1080p.
When connected to an HDTV, some of the camera's playback functions may
not be available.
The length of time after which the camera and an HDTV are connected may
vary depending on the memory card that you are using. As the main feature
of a memory card is to increase the transfer speed, it is not necessarily true
to say that a memory card with a faster transfer speed is also fast in using the
HDMI function.
1920X1080 (60 fps) videos can be played only on Full HDTVs capable of
playback at 60 fps.
To view 3D photos on a TV that does not support the 3D function, press the
button and switch to Anaglyph mode.
You can also play back or capture photos or videos when connected to an
HDMI-enabled monitor. Connections may vary depending on the monitor.
Refer to the monitor's manual for more details.
174
Advertisement
Table of Contents
