Set Up Instructions - Stamina 55-1777 Owner's Manual

SET UP INSTRUCTIONS

EMR ELLIPTICAL
Place the
ELLIPTICAL
is approximately 58 1/4" long x 25 5/8" wide x 61 3/8" tall. (These dimensions may vary up to
one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the
sure that adequate space is available for access to and passage around the
Adjust the
LEVELING:
on the floor without rocking.
EMR ELLIPTICAL
The
MOVING:
STABILIZER(3)
EMR ELLIPTICAL
the
FUNCTION INSPECTION:
EMR ELLIPTICAL
Visually inspect the
EMR ELLIPTICAL
the function of the
position on the handlebars. Slowly move your highest foot forward and follow the natural path of the machine.
Turn the crank slowly through one complete revolution to verify that the drive train functions properly. Use
the " / " buttons on the
provides different tensions. Refer to the COMPUTER INSTRUCTIONS on pages 12 to 16.
in the area where it will be used. The max. operation dimensions of
LEVELING CAPS(51)
has a pair of
at the front. Grasp the center section of the
forward to move.
GRASP HERE TO MOVE
to verify that assembly is as shown in the above illustration. Check
. Stand on the foot pedals and place your hands at a comfortable
COMPUTER(33)
REAR STABILIZER(2)
on the
MOVING WHEELS(49)
to select a program and verify that the Magnetic System
10
EMR ELLIPTICAL.
EMR ELLIPTICAL.
so that the elliptical sets
built into the
HANDLEBARS(6, 7)
GRASP HERE TO MOVE
EMR
Make
FRONT
and tip