Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-7ISA Motherboard.
Install the CPU
Step 1.
Mark your CPU Frequency:
PGA CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0)
466MHz (66 x 7.0)
433MHz (66 x 6.5)
500MHz (66 x7.5)
FSB 100MHz
500MHz (100 x 5.0)
550MHz (100 x 5.5)
FSB 133MHz
533MHz (133 x 4.0)
600MHz (133 x 4.5)
CPU Mount Procedure:
have purchased separately, follow these instructions.
1 1
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3.
Seat the processor in the socket completely and without forcing.
4.
Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
Record the working frequency of your FC-
533MHz (66 x 8.0)
566MHz (66 x 8.5)
600MHz (100 x 6.0)
650MHz (100 x 6.5)
667MHz (133 x 5.0)
733MHz (133 x 5.5)
To mount the Pentium® & Celeron
3
7
SY-7ISA Quick Start Guide
600MHz (66 x 9.0)
633MHz (66 x 9.5)
700MHz (100 x 7.0)
800MHz (100 x 8.0)
750MHz (100 x7.5)
850MHz (100 x 8.5)
800MHz (133 x 6.0)
933MHz (133 x 7.0)
866MHz (133 x 6.5)
TM
processor that you
2
4
667MHz (66 x 10.0)
700MHz (66 x 10.5)