SOYO SY-7ISA Quick Start Manual page 19

Pentium iii processors intel fw82815 agp/pci/cnr motherboard 66/100/133 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-7ISA:

Table of Contents

SY-7ISA Quick Start Guide

SynthCore Lite Application for Windows NT 4.0

The CD contains a SynthCore Lite application program, that the Quick Start Guide does not

describe. It can be installed by running StacGold.exe in the D:\drive-all\sigmatel\StacGold

directory. (Were D is your CD-ROM drive letter).

Note that the NT4 installation requires a manual step at the end of the installation.

This step apllies to NT4 only. (NT4 Service Pack 4 has to be installed, Service Pack

4 includes DirectSound 3)

1) After you run the normal installer, DO NOT reboot your system yet.

2) Go to Start > Settings > Control Panel > Multi Media

3) Select the "Devices" tab

4) Select the "Add" Button

5) Select "Unlisted or Undated Driver"

6) Browse to c:\Program Files\Staccato\SynthCore Lite\oemsetup.inf and select this file.

7) Now look under the MIDI Devices tab, you should see the Staccato MIDI driver.

8) Reboot your machine.

This finishes the installation process.

Table of Contents