Descriptive Diagram; Control Module - TEFAL Clipso Control User Manual

Descriptive diagram

A - Timer*
B - Locking button
C - Lid knob
D - Unlocking button
E - Stainless steel lid
F - Module retaining nut
G - Lid seal
H - Vitamin basket*
I - Steam basket*
J - Fixed pan handle*
K - Integrated basket supports
L - Handle release button*
1 - Characteristics
Pressure cooker base diameter
Total Interior
Capacity diameter
4.5 L 5.3 L* 22 cm
6 L 6.8 L* 22 cm
4.5 L - 25 cm
8 L 9.4 L* 25 cm
10 L 11.4 L* 25 cm
* Product capacity with the lid in position.
Normative informations:
Maximum operating pressure: 80kPa.
Maximum safety pressure: 140kPa.
Compatible heat sources
GAS SOLID HOB HALOGEN INDUCTION
RADIANT
Stainless steel models are suitable for all hob types,
including induction.
On electrical and induction stoves, use a hot plate
or hob or ring size of diameter of equal or lower than
the base of the pressure cooker.
On a ceramic hob, make sure that the base of the
pot is clean and dry.
On a gas hob, the flame should not lick out from
around the base of the pressure cooker.
On all sources of heat, make sure that your pressure
cooker is correctly centred.
!
Do not heat your pot when it is empty, as
you risk damaging your product.
TEFAL spare parts
Use only TEFAL original parts suitable for your
model.
* depending on model
Base
Clispo
diameter
18 cm P41306
18 cm
20 cm
20 cm
20 cm
RADIANT
RING
M- Folding pan handles*
N - Stainless steel pot
Control panel
O - Operating valve seal
P - Steam release outlet
Q - Operating valve
R - Pressure indicator
S - Control module fixing screw
T - Safety valve
U - Programme selector
Model
Clipso
Control
P41006
- P41007
- P41012
- P41014
- P41015
2 - Opening
Press the unlocking button on the side of the lid
knob; the jaws will release - Fig 1
Lift the lid off.
3 - Closing
Place the lid over the pressure cooker, ensuring that
it is sitting correctly on the pot.
Press down on the locking button - Fig 2
It is normal for the lid to be able to twist round
whilst it is locked.
The clamps must be in contact with the edge of the
lid - Fig 3

4 - Control module

To remove the control module from the lid
Remove the timer* - Fig 4a
Turn over the lid.
Loosen the screw holding the module using a coin,
while holding the module with your other hand
- Fig 5 - 6
Clipso Clipso
Control+ Modulo
- -
P41107 P40807
- -
P41114 P40814
P41115 P40815
1