Dimplex DF3015 Owner's Manual page 11

Operation
ure 2B) to the Remote position
(right position).
4. Press and hold the Initializa-
tion Button on the unit (Figure
2C).
5. While holding the Initialization
Button, press the Flame/Heat
On/Off button or the Puri-
fire™ On/Off button on the
remote control.
6. Release the Initialization But-
ton on the unit.
7. Press the Flame/Heat On/Off
button to turn the Flame/Heat
function on or press the Puri-
fire™ On/Off button to turn
the Purifire™ function
Remote Control Functions
(All letter references are to Figure 4)
B. Set Temperature
Press H button to turn fire-
place on.
Press J to raise thermostat, or
I to lower the thermostat.
Press both J and I to change
°F to °C.
C. Light Dimmer Control
Press the
Flame & Heat on.
Repeatedly press the L or K
button to increase or decrease
on.
button to turn the
the brightness of the upper
lights.
D. Flame Speed Control
Press the
Flame & Heat on.
Press the N button to increase
the speed of the flame.
Press the M button to de-
crease the speed of the flame.
E. Sleep Timer
The Sleep Timer automatically
shuts off the fireplace after a
preset time (from 30 minutes
to 8 hours).
During fireplace operation, to
set the sleep timer press the
P button. Set the timer from
30 minutes through 8 hours.
The fireplace will automatically
turn off when the sleep timer
reaches zero (0) minutes.
The sleep timer can be can-
celled at any time by pressing
the O button repeatedly until
the sleep timer displays noth-
ing.
F. Purifire™
When the Purifire™ function
is on, the Purifire™ symbol
will flash. When off the symbol
will be solid. The default set-
button to turn the
11