Integrated Peripherals - Intel P35 User Manual

P3 Series

4.5.6 Integrated Peripherals

► OnChip IDE Device
► Onboard Device
► SuperIO Device
► USB Device Setting
→←
:Move Enter:Select
↑ ↓
F5: Previous Values
►
OnChip IDE Device
Click <Enter> key to enter its submenu:
IDE HDD Block Mode
IDE DMA transfer access
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
LEGACY Mode Support
→←
:Move Enter:Select
↑ ↓
F5: Previous Values
IDE HDD Block Mode
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the
drive can support. It also improves the speed of access to IDE devices.
IDE DMA transfer access
This item allows you to enable the transfer access of the IDE DMA then burst onto the
PCI bus and nonburstable transactions do not.
IDE Primary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) were used by the IDE devices.
Choose Auto to let the system auto detect which PIO mode is best, or select a PIO mode
from 0-4.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press
Press Enter
[Press Enter]
[Press Enter]
[Press Enter]
+/-/PU/PD:Value
F6: Fail-Safe Defaults
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Enabled
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
+/-/PU/PD:Value
F6: Fail-Safe Defaults
- 2 -
Enter]
Menu Level ►
F10:Save ESC:Exit
F7: Optimized Defaults
Menu Level ►►
If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
F10:Save ESC:Exit
F7: Optimized Defaults
User's Manual
Item Help
F1:General Help
Item Help
F1:General Help