Wiring Connection; Part List For Installation - Kenwood KMM-X50BT Instruction Manual

Wiring connection

Fuse (10 A)
Microphone
input jack
( 9)
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
Front output, Rear/subwoofer output
Antenna terminal
White
Light blue/yellow
White/Black
(Steering remote
control wire)
Gray
Gray/Black
Green
Blue/White
Green/Black
(Power control wire)
Purple
Purple/Black
Red
Brown
(Ignition wire)
(Mute control wire)
Yellow
(Battery wire)
USB cable
If no connections are made, do not let the wire
come out from the tab.
To the steering wheel remote control
adapter
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To connect the Kenwood navigation system,
refer your navigations manual.

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH | 19