Kenwood KMM-X50BT Instruction Manual page 17

Symptom Remedy
"iPod ERROR" appears. • Reconnect the iPod.
• Reset the iPod.
"READING" keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not This is caused by how the tracks are recorded.
correct.
Correct characters are not This unit can only display uppercase letters, numbers, and a
displayed (e.g. album limited number of symbols.
name).
"ADD ERROR" New station creation is unsuccessful.
"SEARCH ERROR"
"CHECK DEVICE" Check the Pandora application on your device.
"NO SKIPS" The skip limit has been reached.
"NO STATIONS" No stations are found.
"STATION LIMIT" The number of registered stations has reached its limit. Retry
after deleting unnecessary stations from your device.
"UPGRADE APP" Make sure you have installed the latest version of the Pandora
application on your device.
"CONNECT ERROR" Communication is unstable.
"RATING ERROR" Registration of thumbs up/thumbs down has failed.
"LICENSE ERROR" You try to access from a country which Pandora is not
deliverable.
No Bluetooth • Search from the Bluetooth device again.
device is detected. • Reset the unit. ( 3)
Pairing cannot be • Make sure you have entered the same PIN code to both the unit
made. and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 10)
"DEVICE FULL" The number of registered devices has reached its limit. Retry
appears. after deleting an unnecessary device. ( 13, DEVICE DELETE)
Symptom Remedy
Echo or noise occurs. • Adjust the microphone unit's position. ( 9)
• Check the [ECHO CANCEL] setting. ( 11)
Phone sound quality • Reduce the distance between the unit and the Bluetooth
is poor. device.
• Move the car to a place where you can get a better signal
reception.
• Voice calling method • Use voice calling method in a more quiet environment.
is not successful. • Reduce the distance from the microphone when you
• "N/A VOICE TAG" speak the name.
appears. • Make sure the same voice as the registered voice tag is
used.
"NOT SUPPORT" The connected phone does not support Voice Recognition
appears. feature.
• "NO ENTRY" appears. There is no registered device connected/found via
• "NO PAIR" appears. Bluetooth.
"ERROR" appears. Try the operation again. If "ERROR" appears again, check
if the device supports the function you have tried.
"NO INFO" appears. Bluetooth device cannot get the contact information.
Sound is being • Reduce the distance between the unit and the Bluetooth
interrupted or skipped audio player.
during playback of • Turn off, then turn on the unit and try to connect again.
a Bluetooth audio • Other Bluetooth devices might be trying to connect to the
player. unit.
The connected • Check whether the connected Bluetooth audio player
Bluetooth audio supports Audio/Video Remote Control Profile (AVRCP).
player cannot be (Refer to the instructions of your audio player.)
controlled. • Disconnect and connect the Bluetooth player again.
• "HF ERROR XX" Reset the unit and try the operation again. If this does not
appears. solve the problem, consult your nearest service center.
• "BT ERROR" appears.
TROUBLESHOOTING
ENGLISH | 17