Installation Of The Ventilation System - Dometic TYPE C40 RM 7655 L Manual

6.4 Installing the ventilation system
L 500
To install the ventilation grilles, cut two rectangles (451mm x 341mm) in the
outer wall of the vehicle (for position of the cuts, see point 6.3).
1. Seal the mounting frame, making it waterproof.
2. Insert the frame and
screw into position.
5. Insert winter cover
R 500
Measurements of roof exhaust R500
Length
595 mm
Roof cut out: 87mm X 507 mm
L 205
To install the ventilation grilles, cut a rectangle (451mm x 156mm) in the outer
wall of the vehicle (for position of the cuts, see point 6.3).
Item 1 does not apply for installation
framess with an integrated seal.
1. Seal the frame waterproof.
3. Insert the ventilation
grilles.
Width Height
205 mm 150 mm
1. Seal the installation
2. Screw on the frame.
21
4. Lock the ventilation grilles.
bays and screw
them to the vehcile
roof
3. Insert and lock the ventilation grilles.
2 . Place the hood in
postion and screw
it to the installation
bays.