Installation Of The Ventilation System - Dometic RM 7651 Installation Manual

6.4 Installing the ventilation system
L 300 / L500
To install the ventilation grilles, cut two rectangles (L300 = 490mm x 249mm,
L500 = 451mm x 341mm) in the outer wall of the vehicle (for position of the
1. Seal the mounting frame, making it waterproof.
2. Insert the frame and
screw into position.
5. Insert winter cover
R 500
Measurements of roof exhaust R500
Length
595 mm
Roof cut out: 87mm X 507 mm
L 205 (without mosquito net)
To install the ventilation grilles, cut a rectangle (451mm x 156mm) in the outer
wall of the vehicle (for position of the cuts, see point 6.3).
Item 1 does not apply for installation
framess with an integrated seal.
1. Seal the frame waterproof.
cuts, see point 6.3).
3. Insert the ventilation
grilles.
Width Height
205 mm 150 mm
1. Seal the installation
2. Screw on the frame.
20
4. Lock the ventilation grilles.
bays and screw
them to the vehcile
roof
3. Insert and lock the ventilation grilles.
2 . Place the hood in
postion and screw
it to the installation
bays.